Hydraulic oil filter

Hydraulic oil filter

Oil filter with CNC-milled and black anodized housing including mounting brackets
Up to a pressure of max. 25 bar usable, connection thread M3

Contents of the assembly kit:

•     Filter insert
•     Filter housing
•     O-ring
•     Sealing washer
•     Connection nipple with union
•     Hydraulic hose
•     Screws

Use:

Always place the oil filter in the return line between the valve block and the pump. Never put the filter in the pressure line, otherwise it will
can be damaged. In order to achieve an optimal filter performance, the connection lines should be chosen as large as possible. Pay attention when installing
of the filter on its flow direction. This is indicated by an arrow on the filter element. The arrow must always point towards the tank.

You can connect a maximum of 3 lines on the filter input side. The unused holes must be closed with screws and seals.
On the filter outlet side, the nipple is screwed directly into the filter cartridge. When tightening, the cartridge can twist in the housing. To avoid this
you have to hold against the hexagon with pliers to be able to tighten the nipple properly.